This website uses Cookies in order to provide services in accordance with the cookie policy. You can set your browser in order to determine how to store and access cookies.
Read more »

iMod X500 CM4



iMod 500 CM4 is an industrial computer powered by Raspberry Pi Compute Module 4, which you can easily adapt to your needs. The improved iMod X500 CM4 series uses the latest processor module, powered by a 1.5 GHz quad-core Cortex-A72 processor, 1/2/4 / 8GB LPDDR4 RAM and up to 32GB eMMC on board and the ability to install M.2 NVMe disk and Coral Edge artificial intelligence modules TPU. iMod optionally offers a wide range of additional I / O such as digital and analog I / O, serial ports, Ethernet, CAN and modems.


iMod X500 CM4 Features





Ready-to-use programmable automation controller





iMod X500 CM4 platform has a huge range of possibilities and is also easy to configure. It combines ease of use, characteristic of simple devices and the possibilities of an embedded computer. 




The highest processor performance without the required cooling system thanks to the 4-core Cortex A72 1.5 GHz processor, allows you to use the iMod X500 CM4 device for specific applications, such as remote control of the SmartGrid network 


karta-katalogowa en e

Hardware resources


iMod X500 CM4

  • Cortex-A72 4x1.5GHz processor
  • 2/4/8 RAM and 4/8/16/32 GB EMMC FLASH
  • Rich set of I/Os: 4x Digital Inputs, 4x Digital Outputs, 1x RS-232/485
  • Ethernet 1Gbps and 10/100Mbps interface, USB 2.0
  • Economical 1-Wire interface, for temp. and humidity sensors
  • ABS or Aluminium casing (optional)
  • 10~30VDC power supply

Hardware expansion options

  • 1x RS-232/485 (version STD/MAX)
  • 4x Configurable Digital I/Os (version STD/MAX)
  • 4x Analog Inputs (version MAX)
  • PCI-Express (version STD/MAX)
  • M.2 for SSD NVMe (version STD/MAX)
  • CAN (optional)
  • HDMI (optional)

Internal expansion card options

  • 5G
  • NarrowBand-IoT
  • Moduł GPS
  • WiFi
  • Bluetooth
  • ZigBee
  • LoRa
  • Wireless M-Bus


iMod X500 CM4 can perform following functions:

Data Logger

iMod X500 CM4 telemetry module offers you huge opportunities of registering and data access, using built-in input/output interfaces and communication channels, such as:

  • Serial ports

  • Wireless LTE/3G/GPRS/EDGE transmission

  • Ethernet

  • USB

  • ZigBee

Protocol and Interface Converter

Due to flexible configuration, the device can operate as a protocol and interface converter:

  • Modbus TCP

  • Modbus RTU

  • M-Bus

  • SNMP

  • 1-Wire

In addition, due to the possibilities of the Linux operating system, each user can create their own protocols with the use of the available SDK.

 Embedded Computer

The design of the iMod X500 CM4 allows for trouble-free operation in industrial conditions. It has a fanless case and is characterised by high resistance to external conditions and high reliability. The  Linux system provides stable operation of the device.

Telemetry Module

iMod X500 CM4 is a multichannel telemetry module, providing constant uninterrupted access to data. It enables you to save the results of measurements and parameter values of connected devices - data can be saved to internal memory. You can also save data to internal and external databases.

iMod X500 CM4 can generate alarm signals and provide information on current parameter values. Built-in LTE/3G/GPRS modem enables wireless communication.


iMod X500 CM4 can operate as a typical PLC. The telemetry module can be programmed in ladder logic, which is easy to configure and allows for a quick start of an installation.

Due to the Linux operating system - iMod X500 CM4 is a stable central unit of an automation system.

Industrial modem and LTE/3G/GPRS router

With a built-in GSM modem, iMod X500 CM4 offers advanced functions and can be configured as an industrial modem and a router operating in GPRS, EDGE network as well as in 3G mobile network. You can easily get a backup connection mode and define routing.

You can build a VPN with iMod X500 CM4. You can access other devices with one telemetry module with a defined public IP. The VPN guarantees high security of data transmission.

3G technology provides higher speed and lower latency at packet data transmission.

I/O Expansion Module

Due to digital I/O and analog inputs, iMod X500 CM4 can successfully replace expansion modules.

The iMod X500 CM4 device allows:

visualisation at the monitoring point
remote control via a Web browser
transfer values via any user protocol (e.g. Modbus, SNMP).

GSM / GPRS / EDGE /3G Notify Module

With a built-in GSM modem, the iMod X500 CM4 industrial computer can operate as a notify module: it can send alerts when defined parameter values are exceeded (e.g. temperature, humidity).

You can easily and quickly configure the content of a message which is send instantly when the value is exceeded.

System supervisor will immediately receive SMS or e-mail notification.


GPS receiver allows to use the satellite navigation system. The system is widely used in vehicle monitoring (e.g. transport, railway industry or municipal communication). It allows to synchronize time in extensive industrial networks. It is also used to set a route for industrial machines.

Additional features

  • iMod Platform Support. NPE X500 CM4 can be upgraded to iMod X500 CM4 version. It gives the device a functionality to work in iModCloud Ecosystem.
  • iModCloud EcosystemA combination of a cloud service with a web user interface and special industrial devices that are fully manageable remotely. Core iModCloud Ecosystem elements are iMod controllers and iModCloud service. iMod controllers and iModCloud service together stand as a complete solution.

iModCloud - Dedicated Cloud Service

iModCloud - a dedicated cloud service - allows you to visualize and control parameters of any number of devices via a web browser. Now iModCloud expands to support NPE X500 devices.

With iModCloud you can control all your facilities via any mobile device, register data and share selected information with other users.

iModCloud - dedykowany system internetowy

kontakt-a2s 01boxy 02kontakt-a2s 03