ModBerry 500 CM4 telemetry module offers you huge opportunities of registering and data access, using built-in input/output interfaces and communication channels, such as:

• Serial ports

• Wireless LTE/3G/GPRS/EDGE transmission

• Ethernet

• USB

• ZigBee

Due to flexible configuration, the device can operate as a protocol and interface converter:

• Modbus TCP

• Modbus RTU

• M-Bus

• SNMP

• 1-Wire

In addition, due to the possibilities of the Linux operating system, each user can create their own protocols with the use of the available SDK.

The design of the ModBerry 500 CM4 allows for trouble-free operation in industrial conditions. It has a fanless case and is characterised by high resistance to external conditions and high reliability. The  Linux system provides stable operation of the device.

ModBerry 500 CM4 is a multichannel telemetry module, providing constant uninterrupted access to data. It enables you to save the results of measurements and parameter values of connected devices - data can be saved to internal memory. You can also save data to internal and external databases.

ModBerry 500 CM4 can generate alarm signals and provide information on current parameter values. Built-in LTE/3G/GPRS modem enables wireless communication.

ModBerry 500 CM4 can operate as a typical PLC. The telemetry module can be programmed in ladder logic, which is easy to configure and allows for a quick start of an installation.

Due to the Linux operating system - ModBerry 500 CM4 is a stable central unit of an automation system.

With a built-in GSM modem, ModBerry 500 CM4 offers advanced functions and can be configured as an industrial modem and a router operating in GPRS, EDGE network as well as in 3G mobile network. You can easily get a backup connection mode and define routing.

You can build a VPN with ModBerry 500 CM4. You can access other devices with one telemetry module with a defined public IP. The VPN guarantees high security of data transmission.

3G technology provides higher speed and lower latency at packet data transmission.

Due to digital I/O and analog inputs, ModBerry 500 CM4 can successfully replace expansion modules.

The ModBerry 500 CM4 device allows:

visualisation at the monitoring point
remote control via a Web browser
transfer values via any user protocol (e.g. Modbus, SNMP).

With a built-in GSM modem, the ModBerry 500 CM4 industrial computer can operate as a notify module: it can send alerts when defined parameter values are exceeded (e.g. temperature, humidity).

You can easily and quickly configure the content of a message which is send instantly when the value is exceeded.

System supervisor will immediately receive SMS or e-mail notification.

GPS receiver allows to use the satellite navigation system. The system is widely used in vehicle monitoring (e.g. transport, railway industry or municipal communication). It allows to synchronize time in extensive industrial networks. It is also used to set a route for industrial machines.